MY VHSLE ----- MUSLE1

BODY
BACK TO BARE METAL RESPRAY IN TOYOTA CASSCADE BLUE MICA
FLOW COATED CLEAR COAT
4 NEW DOOR SKINS, ALL DOOR LOCKS WELDED UP
NEW BOOT LID AND REMOTE FUEL FILLER DOOR
AERIAL IN GUARD REMOVED
CHROMED FRONT STRUT BRACE/CUSTOM STRUT TOWER CAPS
MONROE GTI SUSPENSION SITTING ON 16 X 8 B45 SIMMONS
STOCK BRAKES A.T.M (NEED MORE WHOOO)

MOTOR
VN EFI BLOCK WITH 360 PRO STROKE CRANK
CHROME MOLY RINGS, HYPEREUTECTIC PISTONS
PORTED AND POLISHED HEADS, CROW HYDRAULIC 304 CAM WITH CRANE LIFTERS
DOUBLE ROW TIMING CHAIN
BAFFLED SUMP AND HALTEC COMPUTER
GILMER DRIVE
PACEMAKER HEADERS 3 INCH STAINLESS SINGLE HIGH FLOW CAT
BATTERY RELOCATED TO TRUNK


TRANSMISSION
TURBO 700, 3500 RPM STALL CONVERTER
STAGE 3 SHIFT KIT
CORVETTE SERVOS AND HEAVY DUTY BANDS

DIFFERENTIAL
VL V8 BORG WARNER LSD
3:73 GEARS
MODIFIED AND BALENCED TAILSHAFT
TAILSHAFT LOOP
ADJUSTABLE PAN HARD ROD

INTERIOR
STOCK - CAUSE THE GENERAL GOT IT RIGHT! LUXURY TWO TONE BLUE VELOUR TRIM (WHY CHANGE IT ?)

AWARDS
"TOP SEDAN 1979 OWARDS FIRST PLACE" - SMASA SHOW N SHINE #27 2008
"FIRST PLACE"- HOLDEN VB-VL - GM DAY # 25 2008
"THE ANGRIEST SOUNDING" - Street Commodores Cruise 4 charity # 5 2008
"TOP SEDAN STREET 1979 - 1987" South East Street Machine #30 2008
"TOP 10 " MEGUIRES SHOW N SHINE @ Extreme Horsepower 2008
"TOP 10" ALL COMMODORE DAY #2 2008
"PEOPLES CHOICE" ALL COMMODORE DAY #2 2008
"3RD PLACE "TOP SEDAN" SMASA show n shine #28 2009
"BEST AT SHOW" VB TO VL - GM DAY #26 2009
"TOP SHOW PAINT" - Street Commodores Cruise 4 Charity # 6 2009

That's a sweet looking ride you got there mate! You'll have to take me for a spin in November

No probs scott
Will only cost you a hair raising spin in your awesome ride

You're on!! Whats happening with AIR lately? I heard they're going to start "Off Street Racing" again? Would be good if there was a meet on whilst I'm down there, but would have to line up a workshop to help me out with slicks etc

AIR needs a change of owner desperatly! They have resurfaced the track, but no word on street meets yet?
If the graveyard (AIR) ever re-opens for streeters we will look into holding a All Commodore Day Drag meet.

Im with you I feel the need for speed a 1/4 mile at a time

Gazzanats in mid October will be using the track for dial in drags at AIR I hear on the grape vine
edit; same grapevine is Gazzanats broke ???

Cant wait for a spin in that weapon of yours (slicks or no slicks)

I can't see there being a change to that color anytime soon.....

eeeeeeeeeuuuuuuuuuuuuuuwwwwwwwwwwwwwww yuk

nup it stays casscade blue !!!!!!!!!!

a. can you imagine the painter trying to remove the flow coat
b. Gav would kill me

thanks cliff but no thanks

Just picked up the old girl from D&T with new stainless 3 inch pipes installed - wow you will here me coming from the next suburb excellent work by Gav at D&T and very good price too.

It sounded brilliant Steve, very very impressed!

cant wait to here it next time i come over

Watch out for those Hoon Laws

Millsy's way to old to be a hoon!!

HOON ME ?
Most coppers just stare and apprieciate the fine work that has gone into it
Dont even notice there 18"s

The note is fine at idle but at 3000 rpm f@#k

Dont rev it past 6500 the ear drums may go bang

Ok update time
Got the Haltec ECU installed yesterday by Brad at Enhanced, then dyno tuned on the Mainline dyno ...
results =
170 rwkw @ 5,330 rpm @ 140 kph with 683.2 Nm @ 90 kph of torque not bad figures for a 5lt

(oh and just for Gav had about 16 runs on dyno used $70.00 worth of BP ultamite)

remebering that the mainline dyno reads lower than all other Adelaide dynos, we are expecting 195 ish rwkw from the beast and by the time ive reached 140 kpm (gets there real quick) the race is run anyways

have a few issues with idle atm warm motor idle running a bit high, so it goes back this week


because the ecu is now reprogramable 2 more mods to go icluding 75mm Ls1 throttle body with custom made CAI and bigger injectors (I say that now, but were all chashing horsepower aint we)